Methods to Repair Quick Lime Dry Powder Briquetting Machine

Lime briquetting machine is also called lime briquette press machine and lime briquette making machine, which is mainly used to press the coal powder, iron powder, coke, aluminum powder, scrap iron, sinter, toner, carbon dust, slag, gypsum, tailings, sludge, kaolin, activated carbon, coke breeze and other powders and wastes. It is widely used in refractory, power plants, metallurgy, chemical industry, energy, transport, heating and other industries.

Quicklime dry powder briquette machine is a new generation of product which is produced by improving the quicklime dry powder ball press machine and makes full use of the advantages of various kinds of ball equipment by learning from each other. Quicklime dry powder ball press machine avoids the huge waste of resources. The roller is made by adopting steel alloy forging, and it is suitable for the crushing ball work of quicklime dry powder ball press machine and other powdery products.




Important Methods to Repair Quick Lime Dry Powder Briquetting Machine

1. use lengthways or crosswise automatic surfacing method. During lengthways surfacing,cleaned mineral powder briquetting machine's spline is installed on the surfacing tool, the tool don't move, rotate vibration welding head 90°, adjust the welding tip to the key tooth side with mineral powder briquetting machine 45° angle. Wire out side and the parts' surface contact point are on the key tooth pitch diameter, weld from the bedside to tailstock. In order to ensure the welding quality, preheat the workpiece before welding, after welding, outage after the solder wire leave the workpiece to avoid end arc pit.After welding, reopen milling or abrasive machining to reach the technical requirement of small briquette machine.

2. When the mineral powder briquetting machine key tooth wear is not serious, first annealing spline, heat local, then blunt chisel is right to the key center, hammer knocking,along the bond length,to increase 0.5-1.0mm key wideth. After the spline is extruded, weld the trough using electric welding, at last mechanical processing and heat process.

If you are interested in quicklime briquette press machine, welcome to visit Fote Machinery: info@sinoftm.com.

static briquette machine: http://www.fte-china.com/pro/hydrostatic_pressure_briquette_machine.html

dry powder ball press machine: http://www.ftm-mac.com/pt14.html
briquetting machine: http://www.fte-china.com/product13.html